070046,467-6500,Euchner 070046 执行器, 使用于 GP, NP & TP Safety Switch ,Euchner
1200 N retention in locked state
3 conductor insertions (M20 x 1.5)
4 directions sideways with additional direction from above
Rear opening on the actuator head enables the removal of contaminants
Small switch width of 39 mm, therefore ideal for profile mounting
Switching element: 2 positive break contacts, 1 N/O and 1 N/C as door signal contact. The two force guided N/C contacts enable redundant (two-channel), galvanically isolated integration in the safety circuit
When the actuator is removed the NC contacts are open and the NO contact is closed
Pivoting actuator type A for right and left hung doors
Pivoting actuator type B for top and bottom hung doors
Please order actuating key separately
This plastic encapsulated safety switch for monitoring moveable separating protective devices is kept shut and locked by the safety switch until the risk of injury from potentially dangerous machine parts (e.g. run-on movements) has passed.
The protective device is released by applying voltage to the magnets fitted in the safety switch.
| Housing: | Glass fibre reinforced thermoplastic |
| Protection class: | IP67 |
| Mech. service life: | 106 switching cycles |
| Ambient temperature: | -25 °C → +80 °C |
| Retention: | 1200 N |
| Switching element: | 2 positive break contacts + 1 N/O + 1 N/C as door signal contact |
| Switching principle: | Slow-action contact element |
| Contact material: | Silver alloy, gold flashed |
| Cable entry: | Screw connection M 20 x 1.5 |
| Connection cross-section: | 1.5 mm2 |
| Rated insulation voltage Ui | 250 V |
| Usage category: | AC-15 Ue 230 V Ie 6 A |
| DC-13 Ue 24 V Ie 6 A | |
| Min switching voltage: | 24 V |
| Switching current min. at 24 V | 30 mA |
| Magnet operating voltage: | 24 VDC (-15%, +10%) |
| On duration: | 100% |
| Connection power: | 8 W |
