
Universal, freely configurable process controller
Available sizes: 96 x 96 mm and 96 x 48 mm (portrait and landscape)
Two four-digit seven-segment displays
Five or eight LEDs to indicate switching positions and operating modes, eight-digit matrix display
Six buttons for operation and configuration
Basic version features two analogue inputs, two binary inputs and two relay outputs. Extra slots on the 96 x 96 mm version enable up to four analogue inputs and six outputs of any variety; extra slots on the 48 x 96 mm version enable two analogue inputs and three outputs of any variety
Setup program for convenient configuration via PC
Two display configurations
Text / bar chart display
Eight limit comparators
Four set-point values
Two parameter sets
Ramp and program function with eight sections
Setup program for Windows? 95 / 98 / NT4.0
| Analogue inputs (configurable) | |
| Resistance thermometer: | Pt50; 100; 500; 1000; KTY11-6 |
| Thermocouple: | Type L; J; U; T; K; E; N; S; R; B |
| Current: | 4 → 20 mA |
| Voltage: | 0 → 10 V; -10 → +10 V; -1 → +1 V; 0 → +1 V; 0 → 100 mV, -100 → +100 mV |
| Binary inputs | |
| Activation via potential-free contacts. Each with two binary inputs or can be converted to one output | |
| Outputs | |
| Relay | |
| (Changeover contact): | 3 A / 250 Vac |
| Voltage: | -10 → +10 V / 0 → 10 V / 2 → 10 V |
| Current: | -20 → +20 mA / 0 → 20 mA / 4 → 20 mA |
| Interface: | RS422 / 485 with MOD/J-Bus protocol |
| Controller | |
| Controller type: | Two-point, three-point, three-point step controller, |
| Constant controller, constant controller with built-in position controller | |
| Controller structures: | P; PD; PI; PID |
| General data | |
| Sampling time: | 210 ms |
| Voltage supply: | Ac 48 → 63 Hz, 110 → 240 V, -15 / +10% |
| Installation depth: | 130 mm |
| Ambient / | |
| storage temperature range: | -5 °C → 50 °C / -4 °C → +70 °C |
| Protection rating: | |
| Front: | IP65 |
| Back: | IP20 |