600 series configurable regulator
Universal input temperature regulator (thermocouples, Pt 100 thermoresistance and linear signals), configurable by keypad on front panel.
Regulation mode: ON-OFF; P; PD; PID; with ''hot'' and/or ''cold'' outputs with settings that can be adjusted via the keypad.
Double line display for setpoint and measurement.
Functions: auto-adaptive, auto-adjustable, Manual/Auto, Bumpless.
Multi-setpoint function with ramps and timer.
Alarm to check load break or short-circuited probe.
| Supply voltage: | 90 → 260 Vac |
| Display: | 2 x 4 LEDs with 7 green segments |
| Input type | thermocouple J (Fe-CuNi): 0 → 1000 °C |
| | thermocouple K (NiCr-Ni): 0 → 1300 °C |
| | thermocouple N (NiCrSi-NiSi): 0 → 1300 °C |
| | thermocouple S (Pt10Rh-Pt): 0 → 1750 °C |
| | thermocouple R (Pt13Rh-Pt): 0 → 1750 °C |
| | thermocouple T (Cu/CuNi): -200 → 400 °C |
| | thermocouple B (Pt30Rh-Pt6Rh): 44 → 1800 °C |
| | thermocouple E (NiCr-CuNi): -100 → 750 °C |
| | thermocouple L-GOST (NiCr-CuNi): 0 → 600 °C |
| | Pt 100: -200 → +600 °C |
| | JPt 100: -200 → +600 °C |
| Linear signals: | 0 → 50 mV; 10 → 50 mV, |
| | 0 → 10 V; 2 → 10 V; 0 → 20 mA; 4 → 20 mA |
| Potentiometer: | 0 → 10 V |
| Sampling: | 8 times/sec |
| Outputs: | |
| - Relay (R): | 1 N/O (3 A / 250 V) |
| - Logic (D): | 24 VDC; Rout = 100 Ω |
| - Analogue (W): | 0(4) → 20 mA; 0 → 10 V |
| Dimensions (mm): | 48 x 48 x 125 |
| Panel cut-out (mm): | 45 x 45 |
| Protection index | IP65 (front panel) |
| Operating temperature: | 0°C to +50°C |