
Inductive detectors with a diameter of 4 mm for flush mounting.
PNP output with closure (N/O) by cable or M8 3-point connector (available from the catalogue).
LED operation indication.
Protected against reverse polarity and short circuits
| Supply voltage: | 10 → 30 VDC |
| Consumption: | <12 mA |
| Max. load: | 100mA |
| Maximum frequency: | 5 kHz |
| Detection range: | 1 mm |
| Enclosure material: | stainless steel |
| Protection index: | IP 67 |
| Operating temperature: | -25 °C → +75 °C |
|